12
KOHJ-H-01-EN1-1.7-15112021
The Mediresc
™
rescue cover has integrated straps with which the patient can be fixed to
the mattress in case of evacuation.
Patient fastened to the Mediresc
™
rescue cover
The ends of the mattress have rescue/pulling lines which enable evacuation by one per-
son, physical conditions allowing.
Mediresc
™
rescue cover, lifting handles
The Mediresc
™
rescue cover has 2 lifting handles on both sides to facilitate the handling
of the mattress.
The air tubes of the cells are routed out at the left corner of the cover at the foot end.
In the Mediresc
™
rescue cover, the controller’s power cable is routed through a conduit
integrated to the bottom of the mattress, accessible by a zipper, preventing clamping of
the power cable by the sides of the bed or under the bed’s wheels when moving the bed.
Before evacuation, disconnect the controller’s power cable from
the mains and the air tubes from the controller.
The side handles of the Mediresc
™
cover are intended only for gener-
al handling of the mattress without patient load. Failure to observe
this provision may result in broken handles and lead to patient or
care personnel injury.
Do not place a power cable in the conduit if you believe the power
cable may be clamped by the sides of the bed.
