Carestream HEALTH CS 9000, Руководство пользователя

Страница: 31 / 58

CS 9000 and CS 9000 3D User Guide (SM764)_Ed 01 5–1
Chapter 5
ACQUIRING IMAGES
Acquiring a Panoramic, TMJ x2 or Sinus Image for
Adult and Pediatric Patients
Before acquiring an image, check that you have:
•
Reset the unit rotative arm to the start position for patient to enter the unit.
•
Selected the patient record.
•
Accessed the Imaging window .
•
Accessed the Panoramic Acquisition window.
Preparing the Unit and Setting the Acquisition Parameters
To set the acquisition parameters, follow these steps:
1. In the Panoramic Acquisition window, click the Program button to access the
Program pane . Click on the section of the jaw to select the anatomical zone for the
X-ray image, such as panoramic, TMJ x2 or sinus.
2. Click the Patient button to access the Patient pane . Select the patient:
•
Type
•
Dental arch morphology
•
Incisors orientation
3. If the default parameter setting is not adapted to your patient type, click the
Parameter button and select the appropriate parameters. To save the new parameter
settings as the default settings, click and select Memorize settings .
4. Position the appropriate chin rest on the chin rest support and cover the bite block
with a hygienic sheath. If needed, use the edentulous bite block.
5. Press and hold to raise the chin rest to the following positioning indicators:
•
For a panoramic or TMJ x2 positioning
•
For a sinus positioning
IMPORTANT
You must cover the bite block with FDA-cleared protective sheaths
that are available from distributors.