Caremaxx 60101, Руководство пользователя

Страница: 12 / 27

10
Introduction
Thank you for purchasing a Caremaxx
infrared lamp.
This infrared lamp is a Caremaxx quality
product.
Please make sure to carefully read this
user manual before using the instrument.
Keep the user manual in a safe place in
case you wish to consult it later on.
General description
1. Handle
2. Air supply
3. Light filter
4. Hinge
5. Foot
6. Adjusting ring
7. Operating panel
Safety precautions
• Use the product only according to the
instructions in the user manual.
• Inappropriate use will invalidate the
warranty.
• The product is not meant for
commercial use.
• Before connecting the instrument,
make sure to check whether the
voltage mentioned on the instrument
corresponds to the local mains
voltage.
• Repair jobs may only be performed by
authorized service workshops.
• Infrared radiation may heat up any
objects in the vicinity of the lamp so
they become quite hot.
• Be careful – this poses a potential
hazard for burns! Keep the instrument
out of reach of babies, children, and
mentally handicapped persons.
• Watch the instrument well, never leave
it alone as long as it is switched on.
• Never touch the instrument, and
especially the light filter

, if the
instrument is running, as the lamp will
heat up! Also, do not touch it for the
first 15 minutes after switching off the
instrument.
• Using the instrument in the vicinity of
flammable, explosive or heat-sensitive
objects or gases is strictly prohibited.
Keep the instrument away from
flammable objects (such as textiles).
• Never use the instrument in a dusty
environment.
• Never cover up either the instrument
or the vent holes. Keep at least 35 cm
free space around the instrument so as
to prevent overheating.
• Keep the instrument away from other
heat sources and avoid direct exposure
to the sun.
• Never use the instrument at room
temperatures below 10°C or above
35°C.
• Do not expose the instrument to strong
impact.
• Never attach the instrument to a wall
or a ceiling.
• Pull the plug out of the socket before
cleaning the lamp.
• Allow the lamp to cool off for at
least 15 minutes before cleaning it or
putting it away.
• Keep this instrument away from
water.
• Never immerse any part of the
instrument in water or any other
liquid.