Carel PlantWatch, Инструкция по установке и эксплуатации

Страница: 17 / 48

3ODQW:DWFK
Cod. Carel. +030221221 – rel. 1.0 dated 20/02/01 11
/RJ,QIR0HQX
Variable log
Free space:
95%
Duration: 25d 14:00
The Info->Log menu displays the percentage of free memory available for saving the logs and the duration of the variable log,
expressed in days hours:minutes. The duration refers to the block of minimum duration, see Chap.
9DULDEOHORJ
*60,QIR0HQX
The Info->GSM menu is active only if the modem connected to the serial port is a GSM cellphone type. The following
information is available: the name of the network operator that the modem is connected to, the intensity of the signal received as
a percentage, and the error rate that the modem is detecting.
Gsm info
Reading info
Gsm info
Search for network
Gsm info
Network name
Signal: 35% Err: 0%
The name of the network operator is indicated as a text only if present in the internal list; if this is not the case, the numeric
country code is displayed, followed the operator’s code. The intensity of the field (Signal) indicates the reliability of the
communication, and the value should be greater than 20%. The error rate (Err) indicates the effective quality of the signal
received; in optimal conditions this value should be 0.
The initialising of the modem (send PIN) and reading of the data is indicated by the text
5HDGLQJLQIR
. If no signal is available
from the network operator, the text
6HDUFKLQJIRUQHWZRUN
is displayed
6RIWZDUHYHUVLRQ0HQX
Firmware version
V1.0 Dec 1 2000
Checksum: A123B7
Cfg: 10/12/2000 12:23
This menu accesses the following information:
Firmware version, compilation date and checksum; date and time of the most recent parameter modification: this data is updated
after each modification to the configuration parameters, made either locally or via serial line (directly or via modem).
'LVSOD\LQVWUXPHQWYDULDEOHV
Pressing the UP button from the main screen scrolls, in sequence, the screens displaying the current values of the variables
acquired by the instruments. Up to 3 variables can be displayed for each instrument. These variables are the first three in the list
of variables assigned to the log for a specific unit.
If the peripheral selected is off-line, the numeric fields will flash and the last values acquired will be displayed. If the values have
never been acquired, asterisks will be displayed.
Pressing the Prg and “Alarm” buttons together for 3 seconds when displaying the data from an instrument temporarily disables
the generation of alarms from the instrument in question (see Chap.
$ODUPPDQDJHPHQW'LVDEOLQJDODUPVIRUPDLQWHQDQFH
); this
status is displayed on the screen by an ‘X’ in the place of the “:” in row 1. Pressing the Prg and “Alarm” buttons again for 3
seconds re-enables the alarms.
02:Instrument name
Variable 1: 20.3
Variable 2: -12.3
Variable 3: -2.3