Carel MuC2SE, Руководство пользователя

Страница: 15 / 40

15
µC
2
SE process c030220416
- rel. 2.3 - 17.05.2018
Levels
“Factory”: accessible with password 66, it allows the configuration of all unit parameters;
“Super User”: accessible with password 11, it allows the configuration of the Super User, User and Direct parameters;
“User”: accessible with password 22, it allows the configuration of those parameters that can be set typically by the user and Direct, therefore relative
to the options.
“Direct”: accessible by pressing “
” for 5 s, it allows to read the probes and any data, which can be interrogated by anyone without compromising
unit operation.
Default parameters setting
To enable the setting procedure for parameters at default values (controller power supply with pressed) set the parameter H22 = 1.
1. Press “
“ and “ ” for 5 s;
2. The and symbols appear along with “00”;
3. Set the password via “ ” and “ ” and confirm with “ “;
4. Select the parameters menu (S-P) via “ ” and “ “. Confirm with “ ”;
5. Select the parameters category (A,b,c,d..) via “ ” and “ “. Confirm with “ ”;
6. Select the parameter via “ ” and “ “. Confirm with “ ”;
7. Modify the parameter value with “ ” and “ ;
8. After modification, press “ ” to confirm or “ ” to annul the modification;
9. Press “ ” to return to the previous menu;
10. To save the modifications, press “ ” several time until going back to the main menu.
Notes:
1.the parameters modified without confirmation via the “ ” key go back to the previous value;
2. if no operations are performed on the keyboard for 60 seconds, the controller exits the parameter modification menu by timeout and the changes
are cancelled.
3. to modify the level of a parameter, enter the levels menu L-P and assign the desired level to each parameter.
3.5 Menu structure
The figure shows the categories of the parameters that can be selected during programming.
Par. Description Def Min Max U.M.
H22 Default parameters setting 0/1 = enabled/disabled 0 0 1 -