Carel humiFog Touch, Руководство по установке

Страница: 14 / 40

14
ENG
humiFog Touch +0300113EN rel. 1.0 - 15.03.20221
4.5 Positioning
Install the pumping station on the floor, indoors, so as to ensure:
• accessibility of the display and that this can be clearly read;
• opening of the front panel;
• easy access to the internal parts;
• connection of the water supply and drain lines;
• power and control electrical connections.
min
19 in
min
19 in
min
19 in
min
39 in
Entrata
ARIA
Uscita
ARIA
Fig. 4.g
Notice:
• check with a spirit level that the
unit is placed on a horizontal
surface;
• if the unit is positioned up
against a wall, do not place
any objects on it that block the
cooling air.
4.6 Opening
Open the panels using the key supplied (figure) to access the electrical panel (A) and the water circuit section (B).
APERTO
APERTO
A
B
Fig. 4.h
4.7 Identification
The pumping station can be identified by the rating plate located inside the electrical panel.
TYPE
Pnom kW
Qnom kW
G20(nat.gas)
G25(nat.gas)
Vac
Hz
PH
kW
kg / h
IP
NOx cl
Date
CODE
IP
Date
Part No.
Serial No.
Rev.
MADE IN ...
CAREL INDUSTRIES
Via dell'Industria, 11, 35020 Brugine
(Padova) Italy
Fig. 4.i
IMPORTANT : tampering, removal or absence of the rating plate or anything else that does not allow certain identifi-
cation of the product will make any installation or maintenance operations difficult and will void the manufacturer’s warranty.
Inlet
AIR
Outlet
AIR
min
min
min
min
OPEN
OPEN