Carel humiFog Touch, Руководство по установке

Страница: 30 / 40

30
ENG
humiFog Touch +0300113EN rel. 1.0 - 15.03.20221
9. CHECKLIST
Final installation checklist
1. Installation site Yes No
1.a Temperature range 34 - 104 °F.
1.b
Protected against rain and humidity.
1.c Protected against direct sunlight.
2. Water line Yes No
2.a All water connections fitted correctly.
2.b Materials compatible for use with water treated by reverse osmosis (stainless steel/plastic).
2.c
Piping on pumping station feedwater line suitable for an operating pressure range of 2 to 5 bars.
2.d Piping of water outlet line from pumping station to the atomisation system suitable for pressures of up to 100 bars.
2.e
Length of the outlet line from the pumping station to the atomisation system within the limits specified by the
manufacturer (par. 5.2).
2.f NOL drain solenoid valves installed at the lowest points of the circuit to facilitate drainage of water (Fig. 5.c).
2.g
Drain pipe and drain tank installed in accordance with the manufacturer’s instructions (par. 4.2).
3. Electrical connections Yes No
3.a Solenoid valves wired n accordance with the manufacturer’s instructions (par. 6.2).
3.b
Connection cables suitably sized for the maximum distance between the pumping station or the zone control-
ler and the rack (par. 6.3).
3.c Enabling and control signals wired in accordance with the manufacturer’s instructions (par. 6.4).
3d Ethernet connection in accordance with the manufacturer’s instructions.
4. Droplet separator Yes No
4.a Double droplet separator at a distance of 3.15”.
4.b Size of the drain tank underneath the separator from 7.87” to 19.70”.
4.c Separator installed in accordance with the manufacturer’s instructions provided in the quick guide +0500066IE,
depending on the type:
- single layer
- double layer
- double layer