manualshive.com logo in svg

Carel easy way aria, Руководство пользователя, Страница: 15 / 44

Поделиться
Скачать
Carel easy way aria Скачать руководство пользователя страница 15

15

GB

easy way ARIA +030220841 - rel. 1.0 - 26.10.2007

This chapter describes the functional characteristics of the terminal.

Fig. 4.a

4.1  Display

Fig. 4.b

Key:

1

Main fi eld.

2

Operating mode indicator

3

Flat battery indicator

4

Wireless connection active with the access point indicator

5

Display in °C/°F indicator

6

Set mode for the value of fi eld 1

7

Fresh Air display indicator

8

Secondary fi eld. 

9

Time in 12/24 h mode indicator

10

Occupancy mode active

11

Time band active (1 or 2) indicator

12

Sleep mode indicator. The digit shows the hours remaining

13

Lock button/function active

14

Active alarm. Field 8 shows “E” + alarm code 1 to 255

4.2  Keypad

Front buttons

(numbered from 1 to 6, from top to bottom, left to right)

n.

button

meaning

1

mode ON/OFF

Pressed briefl y:
• Terminal ON if the instrument is off .• Change 
operating mode (MODE) if ON• Return to the main 
screen.

Pressed and held (3 s):
• Terminal off .

2

Time Bands

Pressed briefl y:
• Enter time band setting mode.

Pressed and held (5 s):
• Enter clock setting mode.

3

Fresh Air

Pressed briefl y:
• Change percentage of Fresh Air (UP/DOWN buttons 
to change value).

4

UP

From the main menu increase the value of the set 
point displayed in the large fi eld.From the other 
menus display the variables or the parameters or set 
the value if fi rst pressing the multifunction button.

5

Multifunction

Each time the button is pressed displays the menu 
set for parameters loc 7, 8, 13, 14, 15. To change, if 
available, the values displayed in the menus, press the 
up/down buttons.

6

DOWN

From the main menu decrease the value of the set 
point displayed in the fi eld.From the other menus 
display the variables or the parameters or set the 
value if fi rst pressing the multifunction button.

  

Fresh Air +

DOWN

+

Pressing Fresh Air/DOWN together accesses the 
parameters menu. Press the UP/DOWN buttons to 
access the desired parameter and the multifunction 
button to set the value, again using the UP / DOWN 
buttons. Press the multifunction button again

Tab. 4.a

4.  TERMINAL

Содержание easy way aria













































Отзывы:

Нет отзывов