Carel compactSteam CH002V1000, Руководство пользователя

Страница: 12 / 28

compactSteam
Cod. +030221905 – rel 1.0 - 18 Jannuary 2006 12
3.4 Steam distribution
3.4.1 Duct steam injection
The maximum allowed duct counterpressure is 39.37 in WC / 980 Pa.
The
compactSteam duct injection models include a plastic duct injection nozzle:
Fig. 3.i
Or a stainless steel duct distributor:
Fig. 3.l
To install the distributor pipes:
1. Cut a round hole in the side of the duct to match the steam pipe and condensate return.
2. Apply silicone sealant to the mounting plate and insert the pipe through the hole and secure it with 4 sheet metal screws.
3. Connect the steam and condensate hoses using the hose clamps supplied.
(Note: end support bracket supplied only with 36” and longer distributors.)
IMPORTANT: allow 2 feet of straight duct downstream of the distributor pipes for evaporation of the steam. Always allow 2 feet upstream. Turbulent air flow may require longer lengths.
A 1.24” (31.5 mm)
B 1.96” (50 mm)
C 2.20” (56 mm)
D 2.26” (57.5 mm)
E 3.93” (100 mm)
F 0.31” dia. (8 mm)
G 0.86” dia. (22 mm)
H 1.18” dia. (30 mm)
I 0.47 or 0.87” (12 or 22 mm)