Carel compactSteam CH002V1000, Руководство пользователя

Страница: 19 / 28

compactSteam
Cod. +030221905 – rel 1.0 - 18 Jannuary 2006 19
5. Operating compactSteam
5.1 3.1 Displaying Information
By pressing the “ reset/sel ” button for 2 seconds, the display will loop from amperage to production in % of the maximum production to the hour counter and back to
amperage:
A
⇒ ⇒
%
⇒ ⇒ ⇒ ⇒
A
1. Amperage : it is the value of the current that flows through the water making it boiling off (default display)
2. Production % : it is the current production expressed as a percentage of the nominal production
3. Hour counter : it is expressed in tens; for instance, when the display shows 13 the real hour value will be between 130 and 139 hours. Note that the hour
counter increment rate is proportional to the steam flow: e.g., in case the steam flow is 40% of the nominal value, the hour counter increment rate will be 40%
and after 100 hours of production the hour counter will show 4 which stands for 40 hours.
5.2 Changing The Maximum Production
The maximum production can be adjusted between 20% to 100% of the nominal production in steps of 5% in order to suit the environment characteristics:
1.
Switch compactSteam off.
2. Keep pressed both buttons “ reset/sel ” and “ drain ” and switch compactSteam back on: the display shows 00 and the spanner blinks; then release the
two buttons.
3. Keep pressed “ reset/sel ” until the display shows 01 . WARNING : do NOT confirm any value higher than 04. In case, press “ reset/sel ” until the display goes
back to the normal operating mode and restart from step 1.
4. Press “ drain ” (min. 1 second) to confirm: the display shows “P0” for 1 second and then P0’s current value;
set
will be displayed beside.
5. By pressing “ reset/sel ” the value of P0 will loop from 20% to 100% in steps of 5%
6. Press “ drain ” (min. 1 second) when done to confirm the new value of P0 and exit to the normal operating mode.
5.3 Activating Manual Drain
Press and hold the “ drain ” button on the front of the unit until the cylinder is drained.
5.4 Resetting the hour counter
The hour counter should be reset every time the cylinder is changed in order to reset and restart the ineternal maintenance timer:
1.
Switch compactSteam off.
2. Keep pressed both buttons “ reset/sel ” and “ drain ” and switch compactSteam back on: the display shows 00 and the spanner blinks; then release the
two buttons.
3. Keep pressed “ reset/sel ” until the display shows 03. WARNING : do NOT confirm any value higher than 04. In case, press “ reset/sel ” until the display goes
back to the normal operating mode and restart from step 1.
4. Press “ drain ” (min. 1 second) to confirm: the hour counter will be reset at once and compactSteam will go back to the normal operating mode.