P
IONEER
P
ATIO
A
WNING
3
O
PERATING THE
A
WNING
T
O
O
PEN THE
A
WNING
:
mc013a
Gear Loop
Upper
Brace
Extend
Loosen Locking Knob
Slide Brace Up
Brace Spring Latch
Center Lock
1.
Loosen the black knob on the upper brace of both arms
2. Insert the hook of the crank handle into the gear loop located on the right side of
the awning.
3.
Turn the handle counter clockwise to extend the awning.
4.
While turning the crank move under the awning to extend the awning completely.
5. Push the braces up to the top of the arms. The brace sliders have a small spring
catch that latches into the end plugs when the braces are at the top of the arms.
6. While pressing outward on the roll bar to tension the fabric, tighten the black
lock knob on the brace. Repeat for the other side.
The crank handle may be extended or shortened by twisting the center lock then
sliding the handle in or out to the desired length. Tighten the center lock when
finished.
CAUTION
Always use the support braces to hold the awning out in
the extended position. Failure to use the braces may result in the awning
collapsing possibly causing injury or damage to the awning or the RV.
Personal injury or damage may occur that will not be covered by warranty.
