( 19 )
PROBLEM
Warning voice message
saying “mains power is
not detected”.
The Dialler is not
accepting or displaying
the programming
commands as shown
on Pages 8-11.
In a power blackout
situation, the Dialler will
not function.
The Blue LED light is dim
or is not lit when the “Call
Button” is pressed on the
remote pendant.
The main unit is not
responding when the
“Call Button” is pressed
on the remote pendant.
(must be pressed for one
second).
Failure to program in a
voice recorded message
CAUSE
l
A power failure
l
The AC power adapter
plug has come out of
the power outlet
l
Power adapter faulty
l
The “FUNCTION” switch
is not in the “SET”
position.
l
The phone you are
using to program is not
compatible
l
The AC power adapter
plug has come out of
the power outlet.
l
The 9-Volt rechargeable
battery is not holding
its charge.
l
The pendant battery is
flat or exhausted.
l
Flat battery in the
remote pendant
l
The “FUNCTION” switch
is not set in “Alarm” or
“Mute” position.
l
The dip switch codes
between the main
unit and the remote
controller do not
match.
l
Faulty Pendant
l
Voice chip may have
been subject to
interference from
external influences.
REMEDY
l
Wait until power supply
resumes.
l
Plug the adapter
back in.
l
Replace Power Adapter
l
Place the “FUNCTION”
switch to “SET”
position.
l
Try another phone.
l
Plug the adapter
back in.
l
Replace with a
rechargeable battery
only
l
Replace the battery.
l
Replace the battery.
l
Set the “FUNCTION”
switch to “Alarm” or
“Mute”.
l
Set the dip switch
codes exactly the same
between the main
unit and the remote
controller. See page 17
l
Replace Pendant
l
Unplug “Line” cable
and disconnect battery.
Retry recording voice
message.
Trouble Shooting
