cardiowise XRCISE STRESS ECHO MED, Руководство пользователя, Страница: 32 / 78

Setup
Technical and visual modifications as well as misprints reserved - © 2017 by ERGO-FIT GmbH & Co. KG
6.3.1 Ergometer
The ergometer on the table is adjustable and can be raised or lowered. In this manner, the
XRCISE STRESS ECHO MED can also be used as an examination table.
The ergometer can be adjusted with a locking pin, activated by a handle (mushroom button)
on the right at the foot of the table. The ergometer is moved into the training position by
pulling briefly on the handle and moving the ergometer up at the same time until it clicks into
place.
Pull briefly on the handle again to fold the ergometer down. The ergometer is moved down
largely on its own by a gas strut. Ensure that the pedals are not in the way. Engage the
ergometer in its final position by applying slight pressure.
6.3.2 Manual switch
The table top can be adjusted via electric motors and two axes in both the longitudinal and
transverse directions (respectively by 45°). The manual switch is used to execute one or
more tilting movements.
Please proceed as follows:
⊗ Ensure that the tilting mechanism is only used with the hip support in place in
order to avoid damage to health .
⊗ The table may only be tilted with the adjustable feet locked, in order to prevent
instability and collision of the table top with the adjustable feet levers
⊗ Ensure a sufficient safety clearance before using the tilting mechanism.
An area with two pushbuttons is located on the front panel of the manual switch for each
movement. The symbols indicate the function of the individual keys. The drives are operated
as long as the keys are held.
2 6