CARDIOSTRONG CST-TR20-2, Руководство по сборке и эксплуатации

Страница: 15 / 60

TR 20
15
+ While tightening the belt, let the equipment run at a speed of 5km/h.
+ Turn the left and right setting screws directly after each other a max. 1/4 clockwise
rotation.
+ Then check if the running belt is still slipping. If this is the case, you must repeat
the described process.
Lubrication of the running belt
+ If the running belt is inadequately lubricated, the friction will increase significantly
and this leads to strong wear of the endless belt, running panel, motor and circuit
board.
+ If you feel an increase in friction from the running belt, this is an indicator that you
should lubricate the belt (however, a lubrication should be done at least every 3
months).
+ The treadmill has a reminder for lubricating the treadmill:
A symbol is displayed on the console every 100 operating
hours. The symbol appears on the display for 5 minutes
and then turns off. In order to turn off the symbol
prematurely, press the INCLINE up and INCLINE down
buttons at the same time.
+ In order to be able to optimally lubricate
the treadmill, the running belt must be
lifted slightly. Then apply some silicone
spray (free of grease) on the entire
running deck. It is easiest to lubricate
when the treadmill is folded up. Apply
three short (approximately 1 second)
sprays of silicone lubricant between the
belt and the running deck.