9
1. Use standard disposable electrodes.
2. Prepare the patient by placing the three electrodes in the standard configuration for a 3-lead ECG
(right arm, left arm, left leg).
3. Connect the ECG leads to the snap on each of the three electrodes. The end of the electrode lead
is labeled with proper placement on the patient. Connect each of the ECG leads to the connector end of
the supplied patient cable labeled R, B and W respectively.
4. Connect the connector of this cable to the
INPUT
section of the rear panel of the SimulScope
labeled
ECG.
Figure 8 Connecting the ECG cable
