12 | Getting To Know Your Product
5.5 cu.ft. Undercounter Refrigerator
Getting To Know Your Product
Product Exterior - Front
Touch Screen Display
The touch-screen display is located in the center of the upper
console and is the single point-of-use for controlling the
refrigerator. The display is 4.3
"
diagonal, landscape
orientated and full-color TFT-LCD supporting 65K color.
Input / Output Door
USB Port
A USB port is available to download the data log of the
optional local temperature monitoring to a USB memory
device. You will use the USB port to download and clear the
data log when the storage is full. The USB port can also be
used to update the firmware. Verify that the port is intact by
inserting the USB drive (not included) and looking for the USB
icon in the icon bar at the top of the LCD display.
Data Monitoring Backup Battery
Activating the Battery:
The included battery is shipped with a protective tab so that
its power doesn’t drain. To activate it, you must remove the
tab from its location inside the I/O Door.
Replacing the Battery:
1. Open the I/O Door.
2. Remove and replace the battery with only type CR123A.
3. Close the I/O Door.
Note:
The battery serves to support continuous temperature
monitoring during power outages and will need to be replaced
periodically.
Note:
We recommend that you keep spare batteries
on-hand. This battery will allow you to continue to monitor
internal temperature even in the event of a power outage.
Ventilation
The Premier Plus refrigeration system is a solid-state system
utilizing fans with moving parts. The functioning of the fans is
integral to heat dissipation. The fans are mounted on the top
of the unit. They will run continuously until the
preprogrammed temperature set point is achieved. After that,
the fans will run at a slower speed when needed to stabilize
temperature.
When replacing the battery, replace only with a
CR123A or IEC16340 type battery.
This battery will not power the refrigeration. You
must ensure uninterrupted power to the
refrigerator and monitoring system at all times.
Do not insert objects into the fan screens to avoid
damaging the unit.
