17
CAUTION: When placing the medication pod into the device and removing the lid, be careful not
to press down on the pod tray. By doing so, you might damage the sensitive scale located at the
bottom of the tray.
CAUTION: Do not attempt to manually manipulate the pod trays because you might damage
the mechanisms that automatically open and close the trays for you.
CAUTION: Keep your fingers away from the device as the door opens and closes so that you
do not catch your finger in a door or hinge. This could result in personal injury.
REMINDER: You must
remove the lid
once the pod is placed in the device. Failure to do so
could result in damage to the device.
Note:
Label the lid with the medication contained in the pod, and then store the lid in an easily
accessible location. If there is a problem with the device, you might have to remove the pods from
the device and replace the lids.
4. Tap Lid is off, pod is loaded.
The pod tray closes. The device reads the information on the pod. A confirmation message displays.
5. Tap Confirm medication.
A message displays indicating that your medication was loaded into the device.
Note: If the information is incorrect, tap Remove the pod. Then, remove the pod from the device,
tap
I’ve Removed the Pod, and begin again. Contact your pharmacist if you need additional help.
6. Tap Tap to Continue.
Note: If you have additional medications to load now, repeat Steps 3 – 6 until you have loaded
all your new medications into the device.
Note: If you have refills to load, a prompt to load the refill displays. In this case, refer to the
Reload a Medication procedure in this section.
Note: If this is the time to take this medication, a prompt to take the medication displays. In this case,
refer to the Take Medication procedure in this section.
7. Tap Return to Home Screen.
8. Once you have loaded all new medications, close the door.
9. Replace or update your medication list, located in the documentation holder at the back of the device.