14
REMINDER: You must
remove the lid
once the pod is placed in the device. Failure to do so
could result in damage to the device.
Note: Label the lid with the medication contained in the pod, and then store the lid in an easily
accessible location. If there is a problem with the device, you might have to remove the pods
from the device and replace the lids.
7. With the pod lid removed, tap Lid is off, pod is loaded.
The pod tray closes. The device reads the information on the medication pod.
A confirmation message displays.
8. Tap
Confirm medication.
A message displays indicating that your medication has been loaded into the device.
Note:
If the information is incorrect, tap Remove the pod and begin again.
9. Tap
Tap to Continue.
The Medication List displays. If you wish to add additional medication, repeat Steps 6 – 9 for each
medication in the order they appear on the Medication List provided by your pharmacist.
10. Tap Return to Home Screen.
A confirmation screen displays.
11. Tap Finish.
Note: If you have a health device (for example, a glucometer) that can function with the InPower™
Personal Medication Assistant, you will receive a message that instructs you to connect it with the
device. Refer to the
Connect a Health Device with the
InPower™
Personal Medication Assistant
section
to complete the process.
12. Close the device door.
13. Place your medication list in the documentation holder, located at the back of the device.
To fit in the holder, fold the list in half, twice.