13
1. From the front left of the device, open the door, and then press the screen power button.
The screen turns on and then the setup screen displays.
2. If necessary, input your 4-digit PIN. Refer to the
Components section for detail on where to
find your PIN.
You may need to input this PIN to access your device
if it has gone to sleep.
3. At the Welcome! screen, tap Let’s Begin Setup.
A series of messages display that the device is pairing
and syncing. If an error occurs, you may need to
perform this step again.
4. At the Initial Setup screen, tap Medications.
5. At the Medication List screen, tap
Add new medi.
The next available pod tray opens.
A prompt to load the medication displays.
Note: If you prefer to load your new medication
at another time, tap I’ll load a pod later.
6. Refer to your Medication List that you received from your pharmacist. Place the first medication
listed into the pod tray. Then,
remove the lid
from the pod.
CAUTION:
When placing the medication pod into the device and removing the lid, be careful
not to press down on the pod tray. By doing so, you might damage the sensitive scale located
at the bottom of the tray.
Do not attempt to manually manipulate the pod trays because you might damage the
mechanisms that automatically open and close the trays for you.
CAUTION: Keep your fingers away from the device as the door opens and closes so that
you do not catch your finger in a door or hinge. This could result in personal injury.
Initial Setup screen