Cardin Elettronica DKS 250T, Руководство пользователя

Страница: 27 / 76

27
Using this procedure (if you possess a master code)
it is possible to add a new keypad / transponder tag
user without directly accessing the interface.
Keypad
• Type the master code into the keypad
and press "
*
".
• The remote user code memorisation
procedure will be activated with a time
maximum of 30 seconds.
The keypad will sound a
beep
and the red
and green leds will light up. The green led
switches off and the function is active.
• Type the new code to memorise into the
keypad (max. 6 digits) and press confirm
"
*
".
• The keypad will sound a two-second long
beep with the green led lit.
The code has been accepted
• Within 13 seconds of confirming the
code press one or more functions A-B-
C-D in sequence (e.g. A-C)
• Press "
*
" and the interface will give
confirmation by sounding a ' beep '.
The code was accepted and the functions assigned
If you have inserted an invalid user code the interface
will sound 5 consecutive
beeps .
Transponder
• On the interface, move the dips of ' S1 ' to
' ON ' depending on the channel function
you wish to assign to the new transponder
tag .
• It is only possible to assign 1 channel
function to a transponder tag.
• Move the tag near to the remote
transponder reader.
• The interface will give confirmation by
sounding a '
beep
'.
4. Memorising user codes remotely
A
1 2 3
ON
4
B C D
CHANNEL