21
DISPLAY MENU
The segments regarding the command status
(
LED “ON”
=
command active
) and safety status
(
LED “ON”
=
safety device at rest
) light up.
The number of manoeuvres appears on the display.
This number always remains visible until you
change the setting. Once
999999
has been
exceeded the lighting up of the decimal point on
the display equals 1 m the six figure number.
10 sec
PRESS PROG
10 sec
The status of the security devices
TB
,
FTCI, FTCS
and
CSP
are always shown on the display.
Memorising the DIP-SWITCH settings and displaying
the firmware version (“
22.
”)
PRESS
PROG
PRESS
PROG
PRESS
PROG
PRESS PROG
PRESS PROG
10 sec
10 sec
10 sec
10 sec
10 sec
10 s after the last
modification you will
automatically exit the mode
and the selected values will
be saved (eg. 4)
10 s after the last
modification you will
automatically exit the mode
and the selected values will
be saved (eg. 3)
10 s after the last
modification you will
automatically exit the mode
and the selected values will
be saved (eg. inSide )
10 sec
10 sec
PRESS PROG
Each time the button is pressed the
number increases (from 1 to 4).
PRESS PROG
Each time the button is pressed
the setting changes.
APL
= Setting the limited opening space (gate1):
1 = 1/3 of the distance :
2 = half the distance
3 = 2/3 of the distance :
4 = the entire distance
SNS
= Setting the current sensor.
1 = motor consu 2 amps
2 = motor consu 3 amps
3 = motor consu 3,5 amps
PMT
= motor power setting.
(BL3924 and BL39rb) 1-2-3-4-5-6 : (inSidE) 1-2-3-4
Reclosing after encountering an obstacle
0 = unlimited number of closing attempts
1-3 = maximum number of closing attempts
10 sec
10 sec
10 sec
10 sec
In the "
test
" mode (activated when the motor has
stopped) it is possible to check the status of the
command and safety devices.
The warning lights will activate once, each time a
“
TA-TC-TAL-TD-TB-FTCI-FTCS-CSP
” command is
received. To return to the normal mode press the button
again “
test
” will appear, then wait for 10 seconds.
10 sec
10 sec
PRESS PROG
BL224E = Straight arm
BL1924 = Articulated
HL2524 = Underground
BLi824 = Inside
PRESS
PROG
10 sec
10 sec
Selecting the type of motor
inSidE = Inside operator BLi924
*
BL3924 = Articulated (self-locking)
BL39rb = Articulated (reversible)
*
Parameter only present in the motors BL3924, BL39rb, inSidE and BLi824
When the ("
TA-TC-TD-TAL-TB- FTCI-FTCS-CSP
")
inputs are activated the warning lights will light up.
10 s after the last
modification you will
automatically exit the mode
and the selected values will
be saved (eg. 3)
10 s after the last
modification you will
automatically exit the mode
and the selected values will
be saved (eg. 2)
10 s after the last
modification you will
automatically exit the mode
and the selected values will
be saved (eg. 4)
10 s after the last
modification you will
automatically exit the mode
and the selected values will
be saved (eg. 1)
PRESS PROG
Each time the button is pressed the
number increases (from 1 to 3).
PRESS PROG
Each time the button is pressed the
number increases (from 0 to 3).
PRESS PROG
Each time the button is pressed the
number increases (from 0 to 9).
PRESS PROG
Each time the button is pressed the
number increases (from 0 to 3).
Setting distance from completely open position
0 = minimum distance
9 = maximum distance
Setting the start of braking during closing
0 = braking during closing disabled
1 = minimum distance start
2 = medium distance start
3 = maximum distance start
PRESS
PROG
PRESS
PROG
PRESS
PROG
Using the
PROG
button you can access the following functions in sequence:
- memorising the status of the dip-switches;
- display the status of the command and safety devices;
- display the number of manoeuvres;
- access the "
test
" mode;
- set the limited opening distance;
- set the current sensor level;
- selecting the type of motor;
- reclosure after encountering an obstacle;
- motor power setting
(only BL3924, BL39rb and inside);
- setting distance from completely open position;
- setting the start of braking during closing.
Содержание 200/BL3924ERB
Страница 49: ...49 NOTES ...
Страница 50: ...50 NOTES ...
