10
Notice:
If you do not intend to use your car for some time, please disconnect your Mar-
ten Free to preserve the battery.
6. Hint for mounting the device
When your car has already been visited by martens, most likely the animals left their marks
for the identification of their area. These odours must unconditionally be removed before
the assembly of the Marten-Free-Device, as other martens could possibly enter even to
a bite protected engine compartment. The best way to do so is by means of an efficient
motor wash. Furthermore, the animals leave their marks frequently under the vehicle, e.g.
on the car park. It is therefore recommendable to remove these traces with detergents and
mop in order not to give any reasons to the marten to be forced to defend its area.
7. Technical data
• Frequency:
12 kHz +/– 10 %
• Acoustic pressure:
approx. 85 dB
• Connecting line:
approx. 50 cm
• Micro-Fuse:
0,2 A
• Charging rate:
approx. 7 mA
• Power consumption:
approx. 0.1 W
• Operating voltage:
12 V DC
• Angle of reflected beam:
approx. 160°
8. General information
• The CE conformity has been declared. All documents are at our office and can be
viewed.
• For safety and conformity reasons it is not permitted to rebuild or modify the device
and/or use it in any other way than described above.
• As Gardigo has no control of the correct and appropriate installation and use of the
device, the warranty can only be applied to a fully equipped device in prime condition.
We assume neither warranty nor liability for damages or following damages related
to this product. This applies especially if modifications or repairs have been made
by the customer, if the circuitry has been modified or components have been used,
other than the original components and/or if the operation of the device has been
incorrect, careless or abusive.
Service Hotline:
Phone +49 (0) 53 02 9 34 87 88
Your Gardigo-Team
