Cardiac Science POWERHEART G3 PRO 9300P, Краткое руководство пользователя

Страница: 18 / 36

70-00969-01 F Powerheart® AED G3 Pro 9300P
2-10
Getting Started
Pad installation
To install the pads:
1. Open the lid of the AED.
2. Place the pad package into the lid so that the expiration label is
visible through the clear window on the lid. The expiration date of
the pads will then be readable without opening the lid of the AED.
3. Match the color of the connectors (red to red and white to white),
then plug the pad connector into the AED case as shown in the
photograph.
4. Tuck the excess cable length in the bottom holder. With the pad
package completely secured to the AED lid, close the lid.
5. Make sure the expiration date is visible through the clear window
of the lid and check to make sure that the STATUS INDICATOR
is GREEN. If the pads are not installed properly, the STATUS
INDICATOR will be RED. Contact Cardiac Science Technical
Support (see
Contact information on page 1-2) or outside the U.S.,
your local Cardiac Science representative.
White
Red