background image

1 0

Part number 3E1089 R3

March 2003

Technical specification

Power required:

Voltage

13.6 V DC ± 15%

Current

290mA

(Without relays operated)

610mA

(All relays operated)

The above currents exclude external devices such as
readers and alarm sounders.

Environmental:

Operating temperature

-10

0

C to +55

0

C

Humidity

95% non-condensing

Maximum number of ...

Inputs

16

(4 state monitored)

Outputs

8

(relay contact current rating at 24 V DC/AC
5 A resistive)

RS485 ports

1

(currently not supported)

Ethernet ports

1

RS232 ports

1

(plus 1 dedicated diagnostic port)

Fuses

FS1 power in

1.5 A Resettable fuse

(processor)

FSA1 to FSA4 power out

500mA Resettable fuse (power out for readers and

 monitoring devices)

EMI Cable Shields

Impedance at 25MHz must be greater than 60 Ohms
Impedance at 100MHz must be greater than 100 Ohms

Note: The Cardax FT Controller 3000 has no replaceable parts.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.  These limits are designed to provide
reasonable protection against harmful interference in a residential installation.  This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.  If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Cardax (International) Ltd could void the
user’s authority to operate this equipment.

:  002132943

:  002132943

:  002132943

:  002132943

:  002132943

Содержание FT Controller 3000











Отзывы: