8
docs.carbide3d.com
9
X/Z+ Box
This box contains all the items listed in the table
below and shown in
Figure 1‑5
.
Item Description
Qty
A
Z-Plus Carriage with Z-Axis
Stepper Motor and Z-Axis
Proximity Switch
1
B
X-Axis Stepper Motor
1
C
M5
×
10mm Socket Head Cap
Screw
4
D
Tramming Plate and Hardware:
M5
×
8mm Socket Head Cap
Screws (4)
5
Sweepy Box
The Sweepy Dust Boot is available for 65mm and
69mm routers. Open the Sweepy box and verify
you received the correct diameter. See
Figure 1‑6
.
Aluminum Extrusion Rails
Examine the three rails, shown in
Figure 1‑7
, and
identify the following:
•
X-Axis Rail (X-Rail):
has Shapeoko/warning
decals on the front and two (2) M6 and four (4)
M4 threaded screw holes along the back.
• Y-Axis Left Rail (Y1-Rail):
is plain.
•
Y-Axis Right Rail (Y2-Rail):
has two (2) M6
threaded screw holes along one side.
Endplates
The two (2) endplates are identical. See
Figure 1‑8
.
Each endplate has eight (8) integrated PEM nuts.
Inspect each nut to verify threads are properly
formed and that it is seated squarely in place.
MDF Baseplate
The MDF baseplate is packed in the bottom of the
shipping box. Identify the MDF baseplate pictured
in
Figure 1‑9
.
Carbide Compact Router
Box
Optional Equipment.
If you ordered the Carbide
Compact Router with your kit, you will receive
everything shown in
Figure 1‑10
.
Precision collets, 0.25
″
and 0.125
″
, are included
in the box in addition to the standard router
accessories and tools.
WARNING:
MDF is sensitive to moisture.
Avoid liquids and/or high humidity. If you are
in a high-humidity environment, consider
sealing the MDF baseplate with a suitable
finish, such as spar urethane or lacquer.
NOTE:
Save the two long foam packing blocks
from the X/Z+ box. We will use them to support
the gantry during assembly.
Figure 1-6
Figure 1-7
Figure 1-5
Figure 1-8
Figure 1-9
Figure 1-10
