Carbatec SS-400H, Руководство пользователя

Страница: 26 / 36

FOR TEC HNICAL SUPPOR T CALL 1800 658 111
SS-400H
MAINTENANCE
!
In the interests of operational safety,
always switch off the saw and remove
the mains plug before carrying out
maintenance work.
GENERAL
Wipe chips and dust off the machine from
time to time using a cloth.
Application a wax coating or surface
protectant on the workbench makes feeding
the workpiece to the blade easier.
MOTOR
The mains cable should be replaced by
a licensed electrician immediately if pulled
out, cut or damaged in any other way.
Note: Do not lubricate the motor bearings or
internal parts!
SAW ARM BEARINGS
Lubricate the saw arm bearings every 50
hours. Proceed as follows (Fig. 18).
• Turn the saw to the side
• Apply a generous amount of SAE 20 oil
to the shaft end and bronze bearings (U).
• Let the lubricant oil work in overnight.
• Repeat the procedure the next day
on the other side of the saw.
There are no parts inside the equipment
which require additional maintenance.
ACCESSORIES
Pinless saw blade mixed pack
3 of each blade type (6 types)
Pack of 18
Product Code: PEG-90-6X3AX
Pinless saw blade skip tooth mixed pack
3 of each blade type (6 types)
Pack of 18
Product Code: PEG-90-6X3EX
Note: See our website for full range
of pinned and pinless blades.
carbatec.com.au/brands/pegas
/scroll-saw-blades
STORAGE
Store the device and its accessories in a dark,
dry and frost-proof place that is inaccessible
to children. The optimum storage temperature
is between 5 and 30 ̊C.
U
Fig. 18
26