Carbatec SS-400H, Руководство пользователя, Страница: 17 / 36

CARBATEC.C OM.AU
SS-400H ASSEMBLY
ASSEMBLY INSTRUCTIONS
BLADE GUARD ASSEMBLY.
Fig. 2
• Install the blade guard to the holder as
shown in the diagram. Secure the screws
with a nut and washer.
• Lift the saw onto the frame and base and
push it onto the workbench.
• Familiarize yourself with the saw operating
elements and features.
MOUNTING THE SAW
ON A WORK BENCH.
Fig. 3
• A workbench made from solid wood is
better than one made of plywood, as
interfering vibrations and noise are more
noticeable with plywood.
• The necessary tools and small parts for
assembling the saw on a workbench are
not supplied with the saw. However, use
equipment of at least the following size:
Mounting Hardware (not included)
• 4 Hexagonal bolts (6mm) 1/4-20 x length
• 4 Flat seal (7mm) 9/321.0
• 4 Washers (7mm) 9/321.0.
• 8 Hexagonal nuts (6 mm) 1/4-20
Drill holes into the seating surface and then
insert the screws.
NOTE: A rubber base for reduction of noise is
not supplied with the saw either. However, we
recommend that you use such a base to keep
vibration and noise to a minimum. Ideal size
400 x 240 mm.
E. Saw body
F. Rubber base
G. Work bench
H. Flat seal
I. Washer
J. Hexagonal nut
K. Lock nut
L. Hexagonal bolt
Fig. 2
Fig. 3
17
F
G
H
I
J
K
L
E