2. Installation
2.2 Installation
①
Disassemble the monitor and
the command from Car.
Pictures are attached for
your reference.
As you can see above, an
original LCD cable of monitor is
connected to the command
②
Connect the original LCD cable
to “LCD-OUT” of the Interface
after disconnecting it from the
command.
And connect the LCD cable
enclosed in our package to
“LVDS-IN” of the Interface.
Then connect the opposite end
of the cable to the spot that the
original LCD cable is connected
of command
Rear View Command
Rear View Monitor
Provided LCD cable
Original LCD
cable
9
Car-Solutions.com
www.car-solutions.com
