3. Settings
3.1 DIP Switch
PIN
Function
Dip S/W Selection
1
Displaying RGB input
ON : RGB mode skip
OFF : RGB display
2
Displaying A/V 1
ON : A/V 1 mode skip
OFF : A/V1 mode display
3
Displaying A/V 2
ON : A/V 2 mode skip
OFF : A/V2 mode display
4
Displaying A/V 3
ON : A/V 3 mode skip
OFF : A/V3 mode display
5
No use(Off)
6
Car model
ON: TT
OFF: TTs, R8
(other cars will be selected from the car
model on the factory mode)
7
Setup of rear camera use
ON : CVBS4
OFF : MAIN
8
Monitor Resolution
ON : 800x480
OFF : 1280x480
※
ON : DOWN / OFF : UP
Default: #8 OFF
※
Example of DIP S/W use
- Use input mode : A/V2, A/V3
- Use original navigation
- External rear camera
▷
DIP S/W : 1
ON (OEM Navigation use)
▷
DIP S/W : 2,3
OFF (A/V1, 2 display)
▷
DIP S/W : 4
OFF (A/V3 display)
▷
DIP S/W : 5
OFF (High Resolution)
▷
DIP S/W : 6
OFF
▷
DIP S/W : 7
ON (Display external
rear Camera)
▷
DIP S/W : 8
OFF
※
Please make sure to disconnect the power cable of the interface and
reconnect the power cable again to apply the dip switch setting
whenever changing DIP switch.
Otherwise, DIP switch setting will not be applied.
12
Car-Solutions.com
www.car-solutions.com
