4. Trouble Shooting
Q. Unable to change mode
A. Check IR or ground cable connection
Check whether LED lamp is on, if not, check POWER cable connection.
Q. When black screen appears
A. Check whether 2
nd
LED is on. If not, double check whether AV cables
are correctly connected
Q. Displayed image color is not proper (too dark or unsuitable color)
A. Try to select “INITIAL” in OSD menu, if it does not work, inform to
manufacturer.
Q. I cannot watch the rear camera on the screen
A. Set the DIP switch #7 as state “ON”.
Q. I cannot watch the rear camera on the screen
A. Set the DIP switch #7 as state “ON”.
Q. OEM image is not displayed.
A. Check interface’s LCD In/Out cable connection. If the status keeps on,
inform to manufacturer.
Q. Screen only displays white color.
A. Check LCD out cable is connected well, if this status keeps, inform to
manufacturer.
Q. Show PIP function via handle button, and original screen appear half only.
A. This is not because of faulty interface, please check original monitor split
function settings.
Q. After connect CAN cable, set gear “P”, video doesn’t appear.
A. Go to “FACTORY MODE”and check “UTIL-Rear Select”. Change
“LAMP”settings to “CAN” with remote control.
※
LAMP : In case of connecting “Rear-C” wire of Power Cable to Rear
Lamp in vehicle.
It may not work on a camera with 12V
26
Car-Solutions.com
www.car-solutions.com
