3. Settings
3.3.3 FACTORY MODE-UTIL2
Instruction> continued…
c. The values that you
registered will appear as green
text in the marked area on
pressing the button. And the
values will be saved
automatically.
d. Register remain buttons’
value in OSD menu like the
above-mentioned.
③
After register, select “SRC”
button in OSD menu. Then,
confirmation message will be
shown as above.
(If data is saved, DVD TYPE and
DTV TYPE will be changed to
“USER” automatically.)
After the whole process above,
the setting has been completed.
So, DVD can be controlled by
touch screen. However, go to
Factory –UTIL2-I_DRV REMOTE
and change it to “USER”
※
When touch the middle of the screen, you can control DVD, DTV using
remote control UI via touch screen or MMI
※
If touch the screen in DVD(A/V1), DTV(A/V2) mode, remote control UI will
appear
If touch the screen in RGB, A/V3 mode, mode switching UI will appear as below
If you want to see mode switching UI in DVD, DTV mode, Select “SRC” button
UTIL2
–
IR MEMORY
FACTORY mode
–
Press
◀
button 2 seconds long on the remote control.
21
Car-Solutions.com
www.car-solutions.com
