CaptiveWorks CW-3000HD, Руководство пользователя, Страница: 50 / 107

USALS Mode
:
●
Orbital Position : Location in degrees of satellite to aim at. (Tip: if you have a USALS
motor that is not set dead on tweaking this number can allow you to use the USALS
function once you find how far off one satellite is you can change the rest by the
difference to simplify setup. That will save having to do the DiseqC 1.2 hunt and store
setup for each location.)
●
Goto Position : tells the motor to move to the angular position specified by USALS.
●
Goto Reference : moves the motor to due south in most cases but may be far East limit
depending on your particular motor.
●
Limits : allow you to set a stop point in either direction in case there is an obstruction
that will not allow full motor movement in both directions.
●
Clear Limits : allows you to remove the limits.
●
Transponder : allows you to choose the transponder that will be tuned to as you search
for the satellite. Ensure this transponder is available in your area.
●
Scan : takes you to the scan screen to scan for channels once the satellite is found and
programmed.
●
Save (Blue): saves the ANGULAR POSITION.
●
Halt (Red): allows you to stop motor movement at any time.
PAGE 50
BACK TO
TOC