CaptiveWorks CW-3000HD, Руководство пользователя, Страница: 16 / 107

8. Check for any system updates. Enter the admin profile. Highlight updates and press enter.
Highlight system and press enter. Make note of the current version of the software on your
system. Back out to the updates screen and highlight download. Press enter. Highlight the
check button and press enter. Compare the update version to your system version. If the update
is newer download it. (For those with no network connection, you may use your browser to
check
ftp://ftp.captiveworks.org/cw3000hd for the update file.)
Install the update. Instructions are available in the announcement for the update on the
Technical Support forum found at
http://captiveworks.org .
9. Setup for channels. Enter the admin profile and choose Antenna. Choose satellite or ATSC.
ATSC: (If you don't have an ATSC system, don't bother. It won't work.) The ATSC area
allows you to scan for channels. Make sure you have a good antenna connection to the ATSC
antenna connector and press the green button to begin scanning. This will configure the
channels available to you. Press the blue button to save the list when the scan is finished. If you
would like to change the channel numbers you may press the yellow button for Channels and
renumber them as you see fit.
Satellite: If you use a switch, choose your switch type. This will enable either 2 or 4 of the
positions depending on the switch you choose. Choose the LNB types connected to the switch
and then choose the satellite the LNB is aimed at. If you wish to separate the satellites you can
add an offset to the channel numbers so you may find each sats channels quickly and prevent
overlapping channel numbers. You may set that under edit. 10000 is generally a good number
to separate each satellite or provider. Once all is configured click the SAVE button. Next you
may scan each satellite you wish to view. Each satellite needs to be scanned separately. Press
the blue button to save the results of the scan.
10. Make sure the channels are available in the user profile. Enter the admin profile. Highlight
profiles and press enter. Highlight channels and press enter. Ensure that all the channels you
would like are in the selected column. You may also remove any unwanted channels if you
choose.
11. At this point you should be ready to enter the user profile and explore what all is available.
PAGE 16
BACK TO
TOC