B 2764 / B 2765 / SO2764R-1 / SO2764R-2
SOLAR LIGHT EN
Warning:
Please read this instruction manual carefully before using the instrument and keep it for future use.
A.
SAFETY INSTRUCTIONS
1.
The device is intended exclusively for private and not for commercial use. Only use this device as describe in this
instruction manual.
2.
Keep it away from heat sources such as radiators, to avoid deformation of plastic parts.
3.
Do not use coarse or abrasive sponges/cloths or steel wool to clean the appliance.
4.
This unit is not designed to be operated by means of an external timer or a separate remote-control system.
B.
HOW TO USE IT
1)
Charging the battery
Before the first use, let the solar panel exposed to the sun light during 1 or 2 sunny days in a view to correctly and fully charge
the battery.
Once the device is correctly charged, you are ready to use it.
2)
How does the light works?
For testing the device before setting it to its definitive place, let it completely charge as described above.
Once completely charged, place the ON/OFF switch to the ON position and cover the solar panel with your hand or a clean
fabric.
Caution, the LED light is very strong, to test your item, you should orientate the spot into a wall.
Never orientate the light to a person or to your eyes!
Remove the fabric from the solar panel, the LED light is automatically OFF
during daytime due to the built in photosensor.
Set your solar light in the place you want, it will automatically turn ON at
night:
-
The 4 LED of the temperature dial will stay ON until the day light
is back
-
The 24 LED panel will turn ON for 15 seconds each time the PIR
sensor will detect a movement
3)
Setting in the selected place
Choose an outdoor location where the solar panel can receive at least 8 hours full and direct sunshine each day. During the
day, the solar panel converts solar power into energy and stores in the rechargeable battery. Shady locations will reduce the
battery charge and shorten the illumination time at night.
