Caple WMF1020, Техническое руководство

Страница: 18 / 28

Description of operation
t e c h n i c a l
12
KG – Drum capacity
7: 7 kg
8: 8 kg
KG options depending on circuit references /
washing machine model.
HOT WATER
0: Cold water
8: Hot water
If the circuit does not have this option it will
always be 0.
R.P.M. (Revolutions per minute)
These values depend on the hardware
reference and the KGs selected.
DOOR OPENING
0: WITHOUT door opening
8 : WITH instant door opening
If the circuit does not have this option it will
always be 0.
RECIRCULATION
0: WITHOUT Recirculation Pump
00: WITH Recirculation Pump
If the circuit does not have this option it will
always be 0.
Circuit validation
(see table 1)
Once the circuit has been configured it is
confirmed by pressing the start/pause button for
3 sec. until the digits stop flashing. After 3 sec. it
exits the configuration process, entering the TSS
programme (See table 1)
• Fagor T.S.S. Programme
In order to check the operation of the washing machine’s electric components, select
the T.S.S. programme by following these steps:
1.- General ON / OFF switch (LCD off)
2.- Press the start / pause button and keep it pressed
3.- Hold down the ON/OFF switch until the LCD screen lights up.
4.-Press and hold down the select spin button and wait approx. 2/ 3 sec. until the
letter is displayed on the screen
5.- Release all buttons simultaneously
6.- Press the spin button and wait until the digits on the screen (LCD) appear (the last
button on the right
fl ashes).
7.- Press and hold down the start / pause button until all the digits on the screen
are
fl ashing.
8.- The number 1 will be displayed on the screen – then follow the instructions in table
1, below.
DISPLAY SELECTION MODE TIME (APROX.)
1 Water intake via Pre-wash Electr Movement of wash
motor at 55 rpm
10 seconds
2 Em Spin 5 min.
3 Water inlet via the electronic valve for washing until wash level is
reached
Pressure switch
level
4 The resistance starts to heat up until it reaches 40ºC +
Intermittent recirculation 90 sec. without being activated and 30
sec. activated
40ºC
5 Water input via pre-wash, wash and softener electrically operated
valve + Recirculation
5 seconds
Pump empty 30 seconds
6
5
4
3
2
1