background image

Warnings and precautions

t e c h n i c a l

1

1.- Warnings and precautions

!

The washing machine must be connected to an earth. If this basic safety rule is 
not respected, the manufacturer shall under no circumstances accept liability for 
injuries suffered by persons or for damage to objects.

To prevent fi re and electrical sparking hazards, personal injury, or other dam-
age when using your washer, take the following precautions:

This washing machine iis supplied with a manual which includes operating, 
maintenance, and installation instructions. Read all the instructions before using the 
the washing machine.

Do not wash articles which have been previously cleaned, washed, soaked or treated 
with gasoline, dry-cleaning solvents or other in

fl

 ammable or explosive substances as 

they produce vapours that may ignite or explode.

Do not add gasoline, dry-cleaning solvents or other in

fl

 ammable or explosive 

substances to the wash water since they produce vapours which may ignite or 
explode.  

Do not repair or replace any part of the washer, nor attempt any type of service unless 
it has been recommended in the maintenance instructions in the manual.

Do not stand or sit on the machine, or support yourself on the open loading door.

To reduce the risk of 

fi

 re or electric shock, do NOT use an extension lead or adapter 

to connect the washing machine to the mains electricity.

The machine must only be used for what it was designed for.

Follow the washing instructions recommended by the manufacturer of the item to be 
washed.

Do not start the washing machine until you have made sure that:

 

• It has been installed according to the installation instructions.

 

• All the water, drainage, mains and earth connections comply with local 

standards and other applicable standards.

Содержание WMF1020





























Отзывы: