manualshive.com logo in svg

Caple PH501E, Инструкция по эксплуатации, Страница: 13 / 16

Поделиться
Скачать
Caple PH501E Скачать руководство пользователя страница 13

Instruction manual PH501E

Please keep this instruction manual for future reference

13

Automatic Operation

To run the system in automatic mode, from a power off position

 

- switch the heater unit to the ON position

 

- press the power ON/OFF button on the controller

 

-  press the Time Period button, The On/Off display icon will now be visible on the 

screen

 

- The unit will now run in automatic mode until either the controller is turned Off or 

switched to manual operation.

Manual operation  

To run the heater manually from a power Off position

 

- press the power ON/OFF button on the controller to switch the unit on. The unit is 

now in the manual function

 

- To set the fan On/Off room temperature use the Up and Down buttons

 

- press the power ON/Off button on the controller to switch the unit off

 

- If you want to switch the heater to automatic function press the Time Period 

Button

Service and repair

This controller is NOT user serviceable. Please do not dismantle the unit in the 
unlikely event of a fault developing. If powering the unit on and off does not 
resolve the problem, please contact a local Caple service engineer.

PH501E Instruction manual.indd   13

16/07/2018   13:44

Содержание PH501E

















Отзывы:

Нет отзывов