Caple PH501E Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 16

Caple PH501E Скачать руководство пользователя страница 10

Instruction manual PH501E

Please keep this instruction manual for future reference

10

Positioning the heater

Once the power supply has been connected ensuring that the electrical cable is not
in contact with any hot surfaces and the plinth is placed in position, slide the heater
unit into the plinth cut out ensuring the power cable is not snagged. Push the unit
fully in until the grill touches the plinth ensuring the heater is centralised in the cut
out and that the unit is sitting flat on the floor.

Securing the Grill

Once the heater is in the correct position secure the grill to the plinth using the 2
screws provided at point “A”

Grill securing point “A”

OPERATION

- Switch the unit on at the wall socket.

- Select the heat setting (lower switch) to Low “ I “

- Switch the power switch (upper switch) to ON “I”

- If you require more heat move the bottom switch to Boost “ II ”

- To switch off move the power switch to OFF “0”

“0” OFF
“I” ON

“I” Low (950w)
“II” Boost (1900w)

PH501E Instruction manual.indd 10

16/07/2018 13:44

«
...
8
9
10
11
12
...
»

Содержание PH501E

















Отзывы:

Нет отзывов