Caple PH501E Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 16

Caple PH501E Скачать руководство пользователя страница 11

Instruction manual PH501E

Please keep this instruction manual for future reference

11

Wall Controller

User Instructions

Reasonable care has been taken to ensure that this guide is in accurate at the time
of printing. As part of the ongoing development of our products the company
reserve the right to vary specifications from time to time without notice.

The heater controller has 2 main functions:

1. Manually turn the unit on and off and adjust the room temperature

2. Programme 3 fixed time periods with individual temperature settings

The heater also has built in frost protection and an open window sensing, which
means the product shuts down when a window is open to save energy. This is done
by monitoring output against temperature, and stopping if the heater is on but the
temperature is not changing.

Controller Overview

1. On/Off

7. Day of week

2. Memory

8. Room Temperature

3. Time period

9. On/Off period

4. Clock

10. Time of Day

5. Up

11. Heater on/off

6. Down

Setting the time of day

1. Press the on/off button to switch on the unit
2. Press the clock button and release. The hour display on the time will now flash.

Adjust the hour display using the Up and Down buttons.

3. Press the Clock button again. The minute display will now flash, adjust using the

Up and Down buttons

PH501E Instruction manual.indd 11

16/07/2018 13:44

«
...
9
10
11
12
13
...
»

Содержание PH501E

















Отзывы:

Нет отзывов