1x strap for fixing the holder (45,0cm x 2,0cm)
The Bcon - Gaming Wearable is preconfigured with B, C, O and N keys.
To change the configuration, a configuration software is necessary. This can
be downloaded from the website: www.bcon.zone
Alternatively, the configuration software can be requested via e-mail:
5. Commissioning
5.1 Charging
A charging cable is not included.
To charge the device, use a USB charging cable compatible with the Micro
USB 2.0 socket on the side of the Bcon - Gaming Wearable.
For charging a power supply with an output of 5V/500mA is sufficient.
Only charge the device at room temperature. If the battery is fully
discharged, charging may take up to three hours before the unit is fully
charged. Charging during use is possible.
If you use a charging cable with power supply, plug the power supply into the
plug socket and the charging cable into the Micro USB socket of the device.
If you use a charging cable without a power supply, plug it into the Micro USB
socket of the device and connect it via USB to an alternative power source
such as the PC.
There is no optical signal during charging. The battery level of the device can
be read out via the configuration software. The device must be connected to
the corresponding PC via Bluetooth.
When attaching and removing the charging cable from the device,
avoid excessive force on the Micro-USB socket. You may cause
irreparable damage to the PCB. Do not remove the charging cable
by pulling on the cable, but only on the according plug.
5.2 Color coding
The color of the signet of the device indicates the current status of the
device:
Red
Delete the current Bluetooth connection or apply a factory reset
Red (flashing)
Low battery
Yellow (flashing)
Ready for factory reset
Green
Ready for Pairing
Blue
Paired with a device
Blue (flashing)
Ready to reset current Bluetooth connection
Violet
Zero point calibration
White
Data transmission
Cyan
Pause Mode
7
8
