Click on the field and select a pause key.
Pressing the defined pause key on the keyboard once puts the device into
pause mode. It will no longer send any signals to the PC. The illuminated
signet flashes in cyan.
Repeated pressing of the pause key terminates the pause mode. The device
then performs a calibration and can be used again afterwards.
Note: The device calibrates itself when leaving the pause mode!
Alternatively, the defined pause key can also be held down. The device
remains in pause mode until the pause key is released.
5.9 Transferring the configuration
After you have defined and optionally saved your preferred configuration,
left click the button "Upload Configuration".
The signet of the device changes to white.
During the upload a loading bar informs you about the progress.
Note. Do not operate the device or other peripherals connected to the PC
during this time!
19
20
