CAPITOL HY- 6900, Руководство по обслуживанию

Страница: 45 / 71

44
44
SECTION 8. PARTS INFORMATION
8.1 PARTS ORDERING PROCEDURE
A. Contact your local dealer, distributor, or
authorized service center.
B. Contact Capitol Gears, Inc. If the above
cannot supply the part(s) you need write:
Customer service
Cable address:
Capitol Gears, Inc. “Cap marine”
349 North Hamline Ave. Tel:
(612) 645
-
9491
St. Paul, MN 55104 Telex: 29-7081
USA
Necessary Information
Sample
1. Model
HP-9400
2. Option Code 1-09400-03011-10111
3. Serial No. 1-105-0680
4. Ratio 3.074:1 A.E.R
5. Eng.Mfg.No (if any)
6. Part Number 1-00230-2800
7. Description Clutch disc, driving
8. Figure Number and
item number
Fig. 46, item 6
9. Quantity being
ordered
19
A list of distributors for Capitol Gear
equipment may be obtained by writing to the
customer service department at the address
mentioned above.
Do not send any equipment to the factory
without authorization from the customer
service department.
Capitol Gears will route parts with
customer’s best interest in mind if routing is
not specified when ordering.
Capitol Gears, Inc. Will provide its
distributors, dealers and service centers with
current changes and additions to service
literature.
Contact your local Capitol representative for
up to date service material.
8.2 UNIT RECORD
CAPITOL GASKET AND SEAL KIT NO.
1-10169-0000 (HY-7700)
1-10168-0000 (HY-6900)
Includes the necessary gaskets, seals and o-
rings commonly used for repair.
Clutch quad rings must be purchased
separately.
NOTE:
Please do not use the terms “Set” or “complete”
when ordering parts but specify exactly each part
required.
“CAPITOL” Marine Gear Model
Serial No.
Installed in (Name of Vessel)
Installed by date
Address
For use with (Engine & Model)
Type of Service
Purchased from (Dealer’s Name & Add.)
Date purchased