3
UCT-1000 TRIPOD
SETUP & WINCH INSTALLATION INSTRUCTIONS
B) Installing the Winch to UCT-1000 Tripod
Once tripod has been set up & leveled(Fig. 4a)
install the winch assembly as follows:
1. Lay the tri-pod on its side as shown in
(Fig. 4b), with leg containing pulley[14] up.
2. Remove the three winch bracket retainer
pins[10,11] and install winch bracket[9] over
tri-pod leg[7]. (
see Fig. 4c
)
c'ont on page 3
FIG. 4a
FIG. 4b
FIG. 4c
14
10
11
8
7
13
9
15
14
