Capital fireplaces Designline DL400, Инструкция по установке и эксплуатации

Страница: 8 / 40

INSTALLATION PROCEDURE
8
2 x Securing Screws
Black Internal Top Panel
Retaining Hooks
Air Plate
Fire Box
Liners
Gas Connection
Cover Panel
Lower Controls
Heat Shield
30°
10mm
1. Remove the two screws at the bottom of the glass
door panel (Fig. 4).
2. Hinge the door upwards by approximately 30°
(Fig. 4).
3. Slide the door to the right by 10mm and remove the
door from it’s hinges (Fig. 5).
4. Withdraw the black internal top panel by raising the
air plate to disengage the retaining hooks (Fig. 6) .
5. Carefully remove fire box liners to avoid damage
during installation process (Fig. 6).
6. Lift off the black burner grille.
Note - pilot tab to be at the front on
re-assembly (Fig. 8).
6. Remove the lower controls heat shield and gas
connection cover panel (Fig. 7).
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Tab
Fig. 8