Capintec CRC-712MH, Руководство пользователя

Страница: 8 / 68

CAPINTEC, INC. CRC
®
-712MH
Figure 1-2
Located on the chamber are 2 labels.
The first label (Figure 1-3) contains statements denoting not to remove the cover because
there are no adjustments that the user can perform in the chamber.
Figure 1-3
The second label (Figure 1-4) is located in three places (on the bottom of the chamber, on
the 150 Volt Battery pack inside the chamber & on the cover of the main power supply in the
readout unit) and pertains to the electrical safety of the chamber and readout. It is necessary
because of the high voltage present (approximately 150 volts) on the Battery board installed
in the chamber and the line voltage inside of the readout. A screwdriver is necessary to
remove the covers to both the chamber and the readout.
Figure 1-4
1 - 2 SAFETY January 08