Capetti Elettronica WineCap WSD12-THEE, Руководство пользователя

Страница: 5 / 7

WSD12-THEE
User Manual
CAPETTI ELETTRONICA s.r.l. - Strada Stratta, 57
10090 CASTIGLIONE TORINESE - TORINO - ITALY
VAT 04837130014 - Phone 011.981.98.11 - Fax 011.981.98.210
e-mail
info@capetti.it - web www.capetti.it
WA0154E_WSD12-THEE_User Manual_R03
V4.8
7. Shutting off/Reactivating the device.
If the device is shut off and left unused for a long time, you can issue the STANDBY command (
refer to Picture 4 - Commands table
). It
corresponds to the command number 4 and must be issued twice to confirm the operation.
Position the WineCapKey in the spot indicated in Picture 3 - WineCapKey positioning and wait for four AMBER flashes, then remove
the WineCapKey from device.
Verify that the device asks for confirmation of STANDBY command with alternate GREEN/RED flashing, then position again the
WineCapKey and wait for four flashes again. The device will confirm the STANDBY status lighting the RED led for 2 seconds twice.
To reactivate the device the TEST command must be issued.
8. Technical Information.
Power supply 8.5Ah - 3.6V type “C” lithium internal battery
Battery life (*)
Up to 5 years
(samples every 10 minutes and radio signal quality at least sufficient)
Measures acquired
(2 input channels)
•
Outdoor temperature
•
Relative humidity
Sampling interval
(
*
)
Selectable from one minute to 24 hours
(10 minutes default)
Datalogger capacity 128,000 samples (
for each channel
)
Working temperature
•
Operative: -30°C ÷ +60°C
•
Warehousing: -40°C ÷ +70°C
Radio frequency ISM 868MHz
Radio coverage
Up to 6Km in line of sight
(can be extended using WR12 battery powered repeaters)
Sealing IP65
Dimensions
•
Datalogger: 90x120x50mm
•
Meteorological protection: 180x95x115mm
Weight
•
Datalogger: 350g
•
Meteorological protection: 330g
Case material ABS
Mounting Fix on 4 points
Connections Wireless, USB
Cable external diameter 4.7mm maximum
Copper wire section 0.05 ÷ 2.5mm² / ÷ 14 AWG
Temperature - Transducer type PT1000
Temperature - Measure range -40°C ÷ +80°C
Temperature - Measure accuracy
± 0.1°C at 20°C
(
growing up to ± 0.5°C at full-scale
)
Temperature - Measure resolution 0.01°C
Relative humidity - Transducer type CMOSens® Technology
Relative humidity - Measure range 0 ÷ 100%
Relative humidity - Measure accuracy
•
±2.5% from 0 to 90%
•
From 90 to 100% change from ±2.5% to ±3.5%
Accuracies are granted between 0°C ÷ 50°C range
Relative humidity - Measure resolution 0.05%RH
* battery life may be influenced by fieldwork conditions, sampling/measuring interval and system configuration .
** radio coverage reachable using up to 32 WR12 repeaters (maximum 16 for each path) between the device and the basestation.