Cap Strength FM-H1007A125, Руководство пользователя

Страница: 14 / 17

14
Step 21:
Using the excess cable from the last step, place the cable
underneath another pulley wheel (61). Secure the pulley
wheel (61) and pulley guide sleeves (62) between the
pulley panels (27) with bolt (36), washers (47), and
locknut (43).
Step 22:
Continue assembly with the same cable and place it above
another pulley wheel (61), then secure it and pulley guide
sleeves (62) between the hanging teeth on the top frame (5)
with bolt (36), washers (47), and locknut (43). Next, pull the
end of the cable (63) and screw it into the selector shaft (12)
using the washer (68).
Step 23:
Align the bottom cable (64) underneath a pulley wheel (61).
Insert both the pulley and a pulley guide sleeve (62) through
the hole in the leg extension (8). Secure into place with bolt (34),
washer (47), top hat bushings (71), and locknut (43). Pull the
bottom cable (64) through the front stabilizer bar (4) and align it
underneath another pulley wheel (61) and secure it and the pulley
guide sleeves (62) into place as shown.
Step 24:
Align the bottom cable (64) underneath another pulley wheel (61)
and insert both the pulley and a pulley guide sleeves (62) into the
hole in base frame (3). Secure into place with bolt (34), washer
(47), top hat bushings (71), and locknut (43). Continue to pull the
bottom cable (64) up through the hole in the base frame (3). Then
route the cable above another pulley wheel (61) and secure it and
the pulley guide sleeves (62) to the partially assembled pulley
bracket B (26) as shown.