background image

 

16

8. EXERCISE GUIDELINES 

Each workout should include 6 to 10 different exercises. Select exercises for every major muscle group, emphasizing 
areas that you want to develop most. To give balance and variety to your workouts, vary the exercises from session 
to session. Schedule your workouts for the time of day when your energy level is the highest. Each workout should 
be followed by at least one day of rest. Once you find the schedule that is right for you, stick with it. 
 

EXERCISE FORM 

Maintaining proper form is an essential part of an effective exercise program. This requires moving through the full 
range of motion for each exercise, and moving only the appropriate parts of the body. Exercising in an uncontrolled 
manner will leave you feeling exhausted. The repetitions in each set should be performed smoothly and without 
pausing. The exertion stage of each repetition should last about half as long as the return stage. Proper breathing is 
important. Exhale during the exertion stage of each repetition and inhale during the return stroke. Never hold your 
breath. 

Rest for a short period of time after each set. The ideal resting periods are: 

  Rest for three minutes after each set for a muscle-building workout. 

  Rest for one minute after each set for a toning workout. 

  Rest for 30 seconds after each set for a weight loss workout. 

 

Plan to spend the first couple of weeks getting familiar with the equipment and learning the proper form for each 
exercise. 

COOLING DOWN 

End each workout with 5 to 10 minutes of stretching. Include stretches for both your arms and legs. Move slowly as 
you stretch and do not bounce. Ease into each stretch gradually and go only as far as you can without strain. 
Stretching at the end of each workout is an effective way to increase flexibility. 

STAYING MOTIVATED 

For motivation, keep a record of each workout. List the date, the exercises performed, the resistance used, and the 
numbers of sets and repetitions completed. Record your weight and key body measurements at the end of every 
month. Remember, the key to achieving the greatest results is to make exercise a regular and enjoyable part of your 
everyday life. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Содержание FM-H1007A125


















Отзывы: