84
English
Problem
Possible cause
Solution
The input [BT] cannot
be selected via the
“Input” buttons.
1. The function BT Select [BTS] is activated.
1 The switching happens in this case automatically as soon as the
Soundbox 3 detects an audio signal from the device.
If unwanted, set BT Select [BTS] to manual
The Soundbox 3 does
not automatically
switch to the input
[BT].
1. The BT Select function is deactivated [MAN].
1. Activate the BTS function [AUT].
2. Bluetooth
®
is disabled on your device.
2. Activate Bluetooth
®
on your device.
3. The Soundbox 3 is connected to another device.
3. Disable Bluetooth
®
on the other device.
4. The device is not paired with the Soundbox 3.
4. Pair your device with your Soundbox.
No playback via
Bluetooth
®
wireless
technology.
1. There is no connection between the Soundbox 3
and the mobile device.
1. Connect mobile device as described.
2. The mobile device is paired,
but it does not play.
2.1. The mobile device needs to be reconnected.
2.2. Set the volume on the mobile device to the
maximum possible value.
2.3. Increase the volume of the Soundbox 3.
2.4. Make sure that sources of interference, such as a
WiFi router or a laptop, are not placed in close proximity
to the Soundbox 3.
2.5. Simultaneous operation via WiFi and Bluetooth
®
connection from a mobile device is not possible
without interference in some cases; therefore, disable
WiFi on the device.
3. You are out of reach (max. 10 m).
3. Reduce the distance between the speaker
and the mobile device.