Canton C 500 Aktiv, Руководство по эксплуатации

Страница: 54 / 68

54
English
With this function (RES) you can return the loudspeaker system to its delivered state (factory settings)� To reset the device proceed with
the following steps:
Warning: ALL of your personalised settings and learned IR codes will be deleted in the process�
1
With the device switched on, press and hold the “Play Mode” key for more than 3 seconds, until
AUT
appears on the display�
2
Press the “Play Mode” key again briefly, until
RES
appears on the display�
3
After pressing the “” key the confirmation message
YES
appears on the display� To complete the deletion process wait
10 seconds� After that all settings will be reset and the loudspeaker system will spring into standby mode�
4
If you wish to cancel the process, press the “Volume –“ key within 10 seconds after pressing the “” key� The display will show
the interruption message
NO
� 10 seconds after pressing the “Volume –“ button, the loudspeaker system springs back to the previous
operating mode without deleting the settings�
5
To exit the menu without taking any action press and hold the “Play Mode” key again for more than 3 seconds� If no input is received
within 10 seconds the device will automatically leave the reset menu�
Restore Factory Settings/Reset (RES)